Frequency Voltage Converter Module FV-5KHz10V Digital To Analog Signal Module.

Feature: \n 1. The module is to convert frequency pulse signal of 0-5 KHz into an analog voltage signal of 0-10V.\n2. The input pulse level of 5V 12V 24V and can be directly input without string resistor. But the input signal frequency should be maintained for more than 0.5 seconds, and the output current is 5mA.\n3. The converter can be used for interface conversion between PLC and inverter or interface matching control between motion control card and inverter.\n4. The optical isolate is used in the input end of the signal to ensure the anti-interference ability.\n5. The multi-coil potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage. \n\nSpecification: \nFeatures:\n\n--\n\nThe module is to convert frequency pulse signal of 0-5 KHz into an analog voltage signal of 0-10V. \n\n--\n\nThe converter can be used for interface conversion between PLC and inverter or interface matching control between motion control card and inverter. \: