CUDTAPI MPPT Solar Charge Boost Charging Controller 36V 24V 48V 60V 72V Solar System Electric Battery Car(400W 15A)

CUDTAPI

How to choose a suitable solar electric vehicle controller At present, there are two models of 300Ww standard and 600W high-power controllers for solar electric vehicle controllers. The solar input power and battery voltage should be determined when choosing. 300W is suitable for battery systems with solar input power less than or equal to 300W and output voltage 24V/36V/48v/60/72V. The default voltage is 48V. 600W is suitable for battery systems with solar input power less than or equal to 600W and output voltage/48v/60V/72V. The default voltage is 48V. Does the original charger of the electric car need to be changed? There is no need to change the original interface of the electric vehicle (mains) charger. It is recommended to connect the solar charging directly to the battery. Both will not affect. It can be charged at the same time and will not flow back to the solar controller. The solar controller must be connected to the solar panel to the battery. Charging is not possible Direct drive motor. What should I pay attention to when installing? When installing this control, make sure to keep a certain distance from the motor controller of the electric vehicle, and make good insulation strength with the motor controller to avoid leakage interference to the controller. First connect the solar panel and the controller, and then connect the battery to the controller. , Pay attention not to reverse/wrong connection of the positive and negative poles, and the solar panel should be placed in an unobstructed place.