Liquipak Tfr Traffic Film RemoverConcentrated 5L

Liquipak

High-quality traffic film remover formulated to remove heavy-duty road film and general dirt from industrial and commercial vehicles. It is a concentrated, rich and foaming product suitable for use with spray bottles and pressure washers.Dilution ratio:The product can be diluted up to 1:40 (one part of the product and 40 parts of water). Based on the surface condition, please follow the dilution ratios: For light soiling dilute up to 1:40, for medium soiling dilute up to 1:20, for heavy soiling dilute up to 1:10. Directions for use:Spray bottle directions:When applied directly to bodywork and soiled areas.For the best results dilute Traffic Film Remover into a spray bottle with hot or cold water as per the guidelines advised. Apply with the spray nozzle directly on the soiled areas. For the best results leave the solution to soak for up to 5 minutes, do not let it dry during this time. Then rinse thoroughly with clean water making sure the solution is fully removed. Do not allow it to dry before washing the solution off.Pressure washer directions:Suitable for all pressure wash systems hot or cold. Pre-dilute with water as required and simply pour into foam lance tank. Adjust the foaming or feed as per requirements.Lightly spray the vehicle ensuring the soiled areas are fully saturated. Allow to soak up to 5 minutes. Agitation is not always required but would aid in cleaning. Do not allow the solution to dry or white staining may appear. Thoroughly wash off with clean water after application and dwell time.