Brixwell 180 Degree Glass to Glass Standard Hinge, Brass Material, Matte Black Finish, 5/16" to 1/2" Glazing Thickness, 3-1/2" Height, 90 Degree in Out Self Centering, Beveled Edge

BRIXWELL

MATERIAL: Manufactured from brass for glass to glass hinge applications where stable mounting and controlled movement are required, supporting straight alignment between two glass panels used in frameless shower and interior glass door installations. FINISH: Matte black finish provides a dark non-reflective surface tone that coordinates with glass door hardware and maintains a consistent appearance across visible hinge surface marks while maintaining consistent appearance. GLAZING THICKNESS RANGE: Designed for use with tempered safety glass ranging from 5/16" to 1/2" thickness, allowing compatibility with common frameless glass door panels used in residential and commercial shower layouts. SWING OPERATION: Supports 90 Degree inward and 90 Degree outward door movement, allowing controlled opening and closing for glass doors that require balanced swing travel on both sides of the hinge axis. SELF CENTERING MECHANISM: Self centering closing action engages when the door reaches within 15 degree of the closed position, guiding the glass panel back to its resting point for consistent alignment during daily use. PIVOT PIN CONFIGURATION: Dual degree pivot pin is factory set for standard closing and can be reversed to adjust the closing position 5 Degree inward using the pre machined opposite side without altering hinge body geometry. DIMENSIONS AND LOAD CAPACITY: Measures 3-1/2" height with 2-3/16" width on both door and sidelite portions, supporting doors up to 28" wide at 80 lbs with two hinges or 32" wide at 120 lbs with three hinges., Weight: 2.11 pounds, Manufacturer: Brixwell