Timco 100Mm X 125Mm To 220Mm (4" X 5" To 9") No Tag Galvanised Timber Joist Hanger

TIMCO

Designed to give a quick and simple solution for timber-to-timber connections such as joists and stairwell trimming. This No Tag timber hanger is manufactured from pre-galvanised steel to provide a high level of corrosion resistance, with a design that allows the use of fewer nails for faster installation. Suitable for 100mm timber and can take up to a 220mm deep joist.. Key Features. No tag timber hanger for fast timber-to-timber connections (joists and stairwell trimming).. Manufactured from pre-galvanised carbon steel with a galvanised finish.. Designed to use fewer nails for faster installation.. To suit 100mm joists with a depth range of 125–220mm.. 60mm bearing (B) for consistent support.. 23 fixing holes (to suit 3.75mm nails).. 0.8mm thickness.. Conforms to Eurocode 5 and service class 2.. Tested to BS 5268 safe working loads.. Typical Applications. Supporting floor joists and other timber members in timber frameworks.. Stairwell trimming and similar timber trimming tasks.. General timber-to-timber construction where a strong, quick-fit hanger is required.. Specifications. Finish. Galvanised. Type. No Tag. Material. Carbon Steel. Joist size (W x H). 100 x 125 to 220mm. Width (W). 100mm. Bearing (B). 60mm. Leg (L). 278mm. Thickness. 0.8mm. Nail holes. 23 (3.75mm). Approval. BS 5268. Eurocode / Service class. Eurocode 5 / Service class 2. Safe working load (BS 5268) – Short term. 7.21kN. Safe working load (BS 5268) – Medium term. 6.86kN. Safe working load (BS 5268) – Long term. 6.00kN. Corrosion rating (1–5). 2 – Occasionally damp/wet, rural and sheltered areas. Pack type. Unit. Pack quantity. 1 Each. Packs Received. 10. Pack dimensions (L x W x H). 60 x 100 x 278mm. Pack weight. 0.22kg