Polypipe 465C112 Polyfast 50mm x 1.1/2in LD Class C MDPE Adaptor Set Mid Blue

Name: Polypipe 465C112 Polyfast 50mm x 1.1/2in LD Class C MDPE Adaptor Set Mid Blue
Brand: Polypipe

Polypipe

Powered by Frooition\n\nmj_plastics_and_plumbing\n\nPolypipe 465C112 Polyfast 50mm x 1.1/2in LD Class C MDPE Adaptor Set Mid Blue\n\n--\n\n--\n\n--\n\nItem Description\n\nPolypipe Polyfast MDPE Mid Blue Adaptor Set 50mm x 1½\"" L.D. (Low Density) Class C B.S.1972 - 465C112\nImperial LDPE/HDPE \n(Black LDPE: BS 1972 / Black HDPE: BS3284)Polyfast Compression Fittings Jointing Instructions\n--Cut the pipe end square with the axis using pipe cutters or shears.\n--Select the correct insert for the size, type and pressure of pipe (e.g. \""½\"" LDPE CLASS D\"") and the correct size of imperial grab ring (e.g. ½\""). NOTE: inserts/imperial grab rings are supplied in standard packs.\n--Remove the nut from the fitting and discard the standard metric 'grab-ring'. Ensure that the seal/thrust washer remain in position and check that the factory applied lubricant grease is present on the rubber seal.\n--Place the nut over the pipe end and push the imperial grab-ring over)