Lay-Z-Spa HydroJet Pump Logic Controller 6CF E05 Circuit Board Motherboard PCB

Name: Lay-Z-Spa HydroJet Pump Logic Controller 6CF E05 Circuit Board Motherboard PCB
Brand: Lay-Z-Spa

Lay-Z-Spa

Lay-Z-Spa HydroJet Logic Controller\n\nNo Heat, 6CF Error, Power Trips\n\nRefurbished, Fully Tested & Ready for Installation\n\nCommon Problems\n\nFailure of the logic controller can manifest in several ways, all of which will prevent correct operation.\n\nNo heat or slow heating where the PRCD/GFCI is not tripping and the controller is not emitting a rapid clicking sound (resembling a pinball machine), typically indicates failure of one or more power relays within the logic controller. In this condition, the relays are no longer correctly switching mains voltage to the heater assembly, preventing normal heating operation.\n\nRapid Clicking Noise, resembling a pinball machine, when the heater is enabled typically indicates a fault with the water flow detection assembly. The magnetic paddle fails to actuate the sensor, preventing the logic controller from enabling the heater elements. This is commonly caused by degradation or weakening of the flow paddle magnet, restricted waterd